Summary:...
If it is found that the gears of the gear reducer are seriously worn during the inspection, we must pay attention to it, because this is a very serious problem that makes everyone feel very worried. If you do not know how to solve the wear problem while paying attention to this aspect, you can continue to look down.
If the hardness of the gear reducer does not meet the requirements, long-term use or when the machine is used in an overload environment will accelerate the wear of the hard gears and affect the normal operation of the transmission system. In order to make the machine run normally and avoid unnecessary damage, we can solve the problem of machine wear through the following methods:
1. When the shaft surface and shaft hole of the gear reducer are worn, the original accuracy of the parts can be restored by electroplating.
2. If the diffuser, paint diffuser, laboratory diffuser and vacuum diffuser are damaged, such as broken gear teeth, they cannot be repaired and new parts need to be reprocessed.
3. Clean the reducer regularly, and do not replace hardware facilities or add cleaning agents during operation to ensure the safe operation of the gearbox.
4. Select the machine model, ensure the safety factor of the machine, operate in strict accordance with the manual, and play its role.
In the processing and production of the gear reducer, when the wear problem occurs, the above-mentioned method must be used to solve it. If it still cannot be solved, you need to ask a professional to deal with it.Do you know what to do if the
planetary gearbox is worn out?
EN
