Summary:...
1. During work, when it is found that the temperature of the oil exceeds 80℃ or the temperature of the oil pool exceeds 100℃ and abnormal noise occurs, stop using it, check the cause, and troubleshoot the fault. After replacing the lubricating oil, the operation can be continued. .
2. When changing the oil, wait for the
Planetary Gear Reducers to cool down and there is no danger of burning, but it should still be kept warm, because after complete cooling, the viscosity of the oil will increase, and it will be difficult to drain the oil. Note: cut off the power supply of the transmission to prevent unintentional power-on .
3. After 200~300 hours of operation, the first oil change should be carried out. In the future use, the quality of the oil should be checked regularly. The oil mixed with impurities or deteriorated should be replaced in time. In general, for long-term continuous work The reducer should be replaced with new oil according to 5000 hours of operation or once a year. The reducer that has been out of use for a long time should also be replaced with new oil before restarting. The reducer should be added with the same oil as the original brand, and must not be mixed with different brands of oil. , Oils of the same grade but different viscosities are allowed to be mixed.
4. The user should have reasonable use and maintenance rules and regulations, and carefully record the operation of the reducer and the problems found in the inspection. The above regulations should be strictly implemented.
EN
