Summary:...
1. Pay attention to the surrounding environment of the geared motor
The influence of the environment on the
planetary gear motor cannot be ignored, so ensure that the environment is clean and dry. In an untidy environment, the contents of the machine are prone to dirt, and the accumulation of dirt for a long time has a great impact on the life of the machine. In addition, if the environment is too humid, it is easy to affect the insulation of the machine.
2. Pay attention to the size of the geared motor voltage
The voltage of the reducer is regulated, generally 5%~10% of the rated voltage. If it exceeds this range, it may burn out the machine. If the machine has not been used for a long time, check the insulation resistance first.
3. The motor should take protective measures
It is best for the reducer to be able to install a switch independently, and the switch setting should have protective measures.
4. Maintain the power cord of the geared motor
The staff should regularly check the power supply wiring of the reducer. Once the lead wires and wiring contacts are found to be loose, they must be connected immediately to avoid phase loss.
5. Number of motor starts and temperature
The start-up of the reducer should not be too frequent, especially when the temperature of the machine is relatively high, and it should not be started frequently to prevent the machine from burning out. In addition, ensure that the temperature of the machine is below 55 degrees.
EN
