Summary:...
The planetary gear reducer is a power transmission device that is precisely matched by the gear box and the motor. The performance of the planetary gear reducer can be evaluated from the aspects of noise, transmission torque, use time, and whether it will leak oil. Routine maintenance is also very important in the process of use. Today, Zhenglang Precision will give you an analysis of the daily maintenance of planetary gear reducers.
1. When the planetary gear reducer is working, when it is found that the oil temperature rises more than 80° or the oil pool temperature exceeds 100° and abnormal noise occurs, it should stop using it, check the cause, and troubleshoot it, and replace the lubricating oil before continuing. run.
2. After cooling, the viscosity of the oil increases, and it is difficult to drain the oil. The planetary gear reducer should be changed at the operating temperature. Cut off the power to prevent electric shock, and wait until the planetary gear reducer cools down and there is no danger of burning.
3. Generally speaking, the planetary gear reducer needs to be replaced once after 220 hours of operation, and each time the lubricating oil is replaced, it needs to be better than the last one. In particular, it should be removed before replacement. residual oil.
4. When the storage period of the planetary gear reducer exceeds one year, the anti-rust treatment must be carried out again.
Regular lubrication and maintenance of the planetary gear reducer can effectively reduce the wear problem in use, reduce the cost of maintenance and replacement time, and at the same time ensure that the equipment can be used better and help prolong its service life.
EN
