Summary:...
Small-power
planetary gear reducers generally have no independent control power input, and their control power is directly connected to the input power inside the planetary reducer. But for the high-power planetary reducer above 55kw, an independent control power supply should be connected to the connection ends R/L1 and S/L2 of the planetary reducer. When the power supply is input independently, its control voltage has two options of AC 200V and AC 00V. The control voltage should be selected according to the actual short-circuit installation. Start Confirmation Confirm that the planetary reducer is displayed as a given frequency display page after the power is turned on. If any other status is displayed, you should troubleshoot before entering quick debug mode. Automatic adjustment. After the basic setting of quick commissioning is completed, it can be determined whether the motor automatic adjustment operation is required according to the actual needs. Or modify the relevant parameters through the setting mode (ADV).
Generally speaking, the use of automatic adjustment can make the motor parameters inside the planetary reducer more accurate, and its operation is relatively simple. Therefore, an automatic adjustment should be performed as much as possible for the planetary reducer used. After completing the economical and quick commissioning settings and automatically adjusting your own operation, you can further set relevant parameters in the setting mode (ADV) according to your actual needs.
EN
