Industry News

Home / News / Industry News / Precautions for the use of small geared motors

Precautions for the use of small geared motors

Update:22-01-2022
Summary:...
At present, the motor is a very common power supply source, and the small geared motor is widely used in many fields of industry, manufacturing, production and life as an integrated body of the motor and the reducer. However, when users use the device, in order to ensure the working efficiency and service life of the device, the following six points must be paid attention to:

1. Before use, it should be ensured that the voltage is normal, and some models also need to ensure that the power supply current is within a reasonable range.

2. When installing the DC geared motor, you should pay attention to whether the fasteners are too long. If the fasteners are too long, the parts inside the motor may be damaged.

3. The small geared motor cannot be overloaded. The overload of the equipment is mainly due to the torque and the force of the shaft. Generally, the torque cannot exceed the rated torque, and the force of the shaft also needs to be controlled within the allowable axial and radial force range.

4. When installing gears and pulleys on the motor shaft of the equipment, do not knock it hard.

5. When soldering is required on the positive and negative terminals of the power supply, the temperature of the soldering iron should be controlled at 340℃±40℃, and the heating time should be kept within 3 seconds.