Summary:...
To ensure the normal operation of the geared motor, it is necessary to keep the geared motor clean, regularly clean the dust and foreign matter on the surface of the geared motor, check the lubricant application status regularly, clean the breather cap regularly, and select the lubricant for the geared motor. The lubricant can reduce the geared motor. The wear between the gears prevents the body from overheating and prolongs the service life of the geared motor.
The geared motor needs to be replaced with new oil after 300 hours of operation for the first time. After that, the oil needs to be changed every 2500 hours of use. Note that the quality and quantity of the oil should be checked regularly during use. If the oil has impurities, aging, or deterioration The gear oil must be replaced at any time. The brand and model of gear oil should be fixed, and different brands, numbers or types of oils cannot be mixed.
In the oil change process, the inside of the geared motor should be wiped out first, and then new oil should be injected. During operation, when the oil temperature is too high (above 80°C) or abnormal noise is found, the operation should be stopped immediately, and the oil leakage, oil temperature and oil level height should be checked regularly, and oil leakage or oil leakage is found. When the temperature is too high or the oil level is too low, stop using it and check the reason for repair or replace with new oil.
Daily protection of geared motors The geared motors should be overhauled regularly, and effective measures must be taken immediately when abnormal shapes or obvious wear are found. After replacing the new parts, the no-load work should be carried out first, and the normal operation should be confirmed. The operating unit should establish a reasonable protection system, and make careful records of the use of the geared motor and the problems found in the maintenance.
EN
